|
Zircon StudSensor i65 OneStep technology finds the center of studs in OneStep
Features & Applications:
StudSensor™ i65 finds wood and metal studs and joists up to 1-1/2 inches deep beneath the surface of walls, ceilings, and floors, in one simple step. The easy-to-read LCD display indicates direction, edge, and center of stud, and the signal strength indicator helps distinguish between shallow and deep targets. AC WireWarning® continuously detects hot AC wiring up to 3 inches deep for safety. When the StudSensor i65 finds the center of the stud, it beeps and the SpotLite® Pointing System shines a beam of light over the center.
Features:
- Auto Depth Sensing automatically scans varying wall depths
- Auto Recalibration continuously recalibrates and points in the direction of the nearest stud
- Exclusive AC WireWarning™ continuously detects hot AC
- Exclusive SpotLite® Pointing System illuminates exact location of stud
- Finds both wood and metal studs
- LCD display indicates direction, edge, and center of studs
- Uses a patented sensor to pinpoint the center and edges of wood or metal studs behind walls, floors, or ceilings
- LCD screen. Easy-to-understand, on-screen graphics and audio signal indicate target
- Exclusive, patented SpotLite Pointing System shines a bright beam of light over target center
Applications:
- Hang heavy cabinets, pictures, mirrors, and shelves securely
- Install ceiling fans, grab bars, and chandeliers
- Install drapery rods and closet organizers
- Install outlets, dimmer switches, and cable lines
Spec Summary:
| Dimensions: |
6.21 in. H x 3.04 in. W x 1.35 in. D
(158 mm x 77 mm x 34 mm) |
| Weight : |
6.0 oz (170 g) with battery |
| Battery type: |
9-V (included) |
| Position accuracy: |
Stud Scan mode:
Up to 3⁄4 inch depth
Center: 1⁄8 inch typical
Edge: 3⁄16 inch typical
At 1 inch depth
Center: 1⁄4 inch typical
Center-finding capability: up to 1-1⁄2 inches deep typical |
| Depth: |
Stud: Typically up to 1-1⁄2 in. (38 mm)
NOTE: Sensing depth and edge detection can vary due to moisture
content of materials, wall texture, and paint. |
| AC Position accuracy: |
Typically 90–250 V at 50–60 Hz within
6 in. (152 mm) of a hot unshielded wire |
| AC Depth: |
In typical drywall with Romex™ wiring, wire
can be detected up to 2 in. (50 mm) deep
NOTE: Sensing depth and edge detection can vary due to moisture
content of materials, wall texture, paint, etc. |
| Operating temperature: |
40 to 120°F (-4 to 49°C) |
| Storage temperature: |
20 to 150°F (-7 to 66°C) |
| Humidity: |
80% RH (non-condensing) |
| Water resistance: |
Splash resistant, not waterproof |
|
